Showing posts with label Ferrari. Show all posts
Showing posts with label Ferrari. Show all posts

Tuesday, May 22, 2012

2012 Wheelsandmore Ferrari 458 Italia Spider Perfetto Review


Wheelsandmore reveals his sunny disposition and completes their 458-program with finest carbon elements entitled “Perfetto”. Now Wheelsandmore offers an armada of perfectly fitting and weight reducing carbon components for the Ferrari 458 Italia.


For the exterior the German cartuner provides only 100% full carbon fibre parts as rear diffusor, fuel cap, rear fog lamp frames, mirrors and spoiler fins. The interior, trunk and engine compartment is refined with side panels, a custom-fit trunk tray and a final panel for the rear window trim. Even the wheelhousings and the entire under-floor can be refined by replacing the autoclave produced high-performance carbon-fibre components with a matte finish. Using all elements of the “Perfetto program” will reduce the vehicle´s weight around 30 kgs.



Wheelsandmore Ferrari 458 Italia Spider Perfetto






Even with the previously offered, maximum power increasement up to 621hp, the company now offers a newly developed Carbonairbox. Many years of knowledge from the racing and motor sport gained in the realization of the larger and throughput-optimized box, which results in the new performance stage III and a significant power increase in the amount of additional 26 hp / 19 nm up to a final 647hp / 635 nm of output. This increasement is achieved by installation of manifolds, valve-controlled exhaust system, a software upgrade and the described carbon-airbox.
The „Perfetto“ creation is completed due customizable forged rims of the type 6Sporz², which are finished sizing 9.0×21″ with 245/30/21″ tires on the front and 12.5×21″ with 345/25/21“ Hankook S1Evo tires at the rear axle.

Thursday, March 8, 2012

Ferrari F12berlinetta 2012 Review


Scaglietti, renowned for its expertise in aluminium materials and construction, designed an all-new spaceframe chassis and bodyshell using 12 different kinds of alloys, some of which have been used here for the first time in the automotive sector, and employing new assembly and joining techniques. This has resulted in a 20 per cent increase in structural rigidity while reducing weight to just 1525 kg (70 kg less than the previous V12 coupé) with an ideal distribution between the axles (54 per cent over the rear).


The F12berlinetta’s 6262cc 65° V12 engine delivers unprecedented performance and revs for a naturally-aspirated 12-cylinder. Its maximum power output is 740 CV which translates to a specific output of 118 CV/l. Torque reaches a peak of 690 Nm, 80 per cent of which is already available at just 2,500 rpm, and which provides an unrelenting surge of acceleration all the way to the 8,700 rpm limit. The engine is mated to the F1 dual-clutch transmission, which has closer gear ratios developed specifically for this car’s performance. The F12berlinetta boasts a weight-to-power ratio of just 2.1 kg/CV.



The F12berlinetta’s impressive technical specifications are completed by Ferrari’s latest generation carbon-ceramic brakes (CCM3) and the evolution of the magnetorheological suspension control system (SCM-E). As is now traditional with all Ferraris, its control systems (E-Diff, ESP Premium, F1-Trac, and high-performance ABS) are all fully integrated.
The result is that the new Prancing Horse 12-cylinder accelerates from 0-100 km/h in 3.1 seconds and from 0 to 200 km/h in 8.5 seconds. It also completes a lap of the Fiorano circuit in 1′23″, faster than any other Ferrari road car. Benchmark performance and maximum driving involvement are guaranteed by immediate turn-in, with smaller steering wheel angles, and increased cornering speed. Stopping distances have also been drastically reduced.







Thursday, December 8, 2011

About Novitec Rosso Ferrari 599 SA Aperta



NOVITEC ROSSO now makes the drop-top version of the Ferrari 599 SA Aperta even more powerful and fascinating. A twin-supercharger conversion bumps power output of the V12 from standard 670 to 888 hp and boosts peak torque to 636 lb/ft, giving the two-seater a top speed of more than 211 mph. The NOVITEC ROSSO options for the limited-edition special model also include extremely lightweight NOVITEC ROSSO forged wheels in a staggered combination with diameters of 21 and 22 inches, sport springs and a stainless-steel high-performance exhaust system with butterfly valve.


Novitec Rosso Ferrari 599 SA Aperta 2012





The power increase by 218 hp to 888 hp at 8,400 rpm means the two-seater now offers power that is as superlative as its new peak torque of 636 lb/ft at 6,600 rpm, a gain of 178 lb/ft over its production brethren.
Together with the F1 Superfast six-speed transmission the NOVITEC ROSSO bi-compressor version delivers exceptional performance. From rest the car sprints to 62 mph in just 3.1 seconds. After 9.1 seconds it reaches a speed of 124 mph; the 186 mph barrier shatters after 21.9 seconds. Top speed is in excess of 211 mph.
The body of the Ferrari SA APERTA is refined by NOVITEC ROSSO in a few details. Supplemental GTO-style front spoiler lip, side skirts and rear fascia that match the look of the front fascia of the special model are installed on the car. All clear-coated carbon-fiber components come with a matte finish for a true racing look. Further understated highlights are added by the NOVITEC ROSSO black lamps that are available for all 599 models. The set includes tail lamps, third brake light, rear fog lamp and side markers.




Sunday, September 11, 2011

Review Ferrari FF 2012


The Ferrari FF features innovations throughout, starting with the fact that it is fitted with Ferrari’s first direct injection V12 which and is the first V12 coupled with the seven-speed Dual Clutch gearbox. The new engine punches out 660 hp at 8,000 rpm and delivers maximum torque of 683 Nm at 6,000 rpm, 500 Nm of which are available at 1,000 rpm. The Ferrari FF boasts the blistering performance of an extreme sports car too: 0-100 kmh acceleration in 3.7 seconds and a top speed of 335 kmh. It also delivers excellent results in terms of efficiency with fuel consumption cut to just 15.4 litres per 100 km and CO2 emissions to 360 g/km, a 25% reduction on the previous V12s. These achievements come in part thanks to the HELE (High Emotions-Low Emissions) system which also incorporates Stop&Start technology.



Styled by Pininfarina, the Ferrari FF’s lines effortlessly reflect its signature uncompromising balance of sportiness and versatility. It can comfortably accommodate four in its bodyhugging seats and spacious cabin. Its 450 litre boot can also be extended to 800 litres as the rear seats fold down independently. This means that the Ferrari FF offers more luggage space not only than any other car in its category, but also many four-door saloons, too.
Everything aboard the Ferrari FF is tailored specifically to the needs and tastes of its driver with a choice of six exclusive colours and the finest Frau aniline leathers specially treated to enhance their natural softness. The Ferrari FF’s exceptional specification enhances in-car enjoyment for all four occupants. Features include a new rear-seat infotainment system with two screens for watching TV and DVD and a 1,280 Watt, 16-channel stereo system with Dolby Surround Sound.



Ferrari FF Technical Specifications
  • Engine
    • Type: 65° V12
    • Total displacement: 6262 cc
    • Bore/stroke: 94 mm x 75,2 mm
    • Maximum power: 660 CV @ 8000 rpm
    • Maximum torque: 683 Nm @ 6000 rpm
    • Specific power: 77 kW/litre – 105 CV/litre
    • Maximum revs: 8000 rpm
    • Compression ratio: 12,3:1
  • Dimensions and weight
    • Length: 4907 mm
    • Width: 1953 mm
    • Height: 1379 mm
    • Wheelbase: 2990 mm
    • Front track: 1676 mm
    • Rear track: 1660 mm
    • Dry weight: 1790 kg
    • Kerb weight: 1880 kg
    • Weight distribution: 47% front, 53% rear
    • Boot volume: 450 litres
    • Fuel tank capacity: 91 litres
  • Wheels and tyres
    • Front: 245/35 ZR 20 8,5 J x 20″
    • Rear: 295/35 ZR 20 10,5 J x 20″
    • Rear (winter tyres): 285/35 ZR20 10,5 J x 20″
  • Brakes
    • Front: 398 mm x 38 mm
    • Wheel: 360 mm x 32 mm
  • Transmission and gearbox
    • 4RM (four-wheel drive) and 7-speed dual-clutch transmission
  • Electronic controls
    • 4RM control (full integration of all controls: F1-Trac, E-Diff and PTU); ABS/EBD; ESC
  • Suspension
    • SCM3
  • Performance
    • Top speed: 335 km/h
    • 0-100 km/h: 3,7 sec
    • 0-200 km/h: 11 sec
    • 100-0 km/h: 35 m
    • Weight/power ratio: 2,7 kg/CV
    • Consumption and emissions (ECE + EUDC combined cycle)
    • Consumption: 15,4 l/100 km
    • CO2 emissions: 360 gr/km









 





Thursday, September 8, 2011

Gemballa MIG – U1 Ferrari Enzo top markotop

Gemballa has unveiled their latest project on Ferrari Enzo called Gemballa MIG – U1. The Gemballa MIG – U1 Ferrari Enzo comes with a V12 cylinder engine works with an optimised motor management and an especially adjusted exhaust system. This combination allows a performance output of 700 hp (515 kW). The four-pipe system with pneumatic flap control is added to the sports catalyser. The end-pipes are equipped with the typical GEMBALLA heat shield and share the exit into the rear skirt with the exhaust ducts of the rear wheel houses.

  

At the front, the 10×19 inch rims hold high-performance wheels in the dimension 265/35, while the back axle transfers the power of the engine through 13×20 inch rims with 335/30 wheels. In the interior, GEMBALLA devises a control centre which perfectly combines functionality and comfort. The especially for the GEMBALLA MIG-U1 designed seats, the custom-made centre console and the sports steering wheel with its leather-ultra suede combination guarantee full control over the car.



Gemballa will produced the Gemballa MIG – U1 limited to only 25 cars. For more information about the Gemballa MIG – U1 and other extensive GEMBALLA refining programme, please visit the web site www.gemballa.com